The demand for thermal break aluminum doors and windows in the market is increasing year by year, and the scope of application is gradually expanding. As we all know, we are accustomed to opening windows every day, and the utilization rate of windows is very high. Well, in the face of such a high utilization rate of door and window equipment, and there is no real operation before buying the equipment, so here are some details of the installation and debugging of door and window equipment.

First, in terms of electricity. Voltage 380V is the normal voltage of general door and window machinery, and the frequency is 50Hz. Therefore, the connection between the live wire and the neutral wire needs to be paid attention to. The live wire and the neutral wire must be connected well, otherwise it may cause an accident. Generally speaking, most door and window equipment manufacturers distinguish by color, the live line is black or blue, and the zero line is red. If the live wires are reversed, just change the two wires.

Second, in terms of gas supply. Since the pressing material of the door and window equipment must ensure sufficient air supply, it can be used better. Under normal circumstances, the air supply and air pressure of door and window equipment are required by fixed parameters. The air supply flow must reach 0.3 and the air pressure must reach 8 pressures. In the case of multiple door and window equipment, it is necessary to prepare more gas storage tanks, which depends on the actual situation. If the air pressure is not reached, the accuracy of the door and window processing equipment will have some influence, and the corresponding processing effect will also deviate from expectations.

Third, the equipment. There are many types of thermal break aluminum doors and windows, and each type of equipment has multiple models, or multiple equipment parts are different, and so on. Therefore, in the installation and debugging of door and window equipment, it is necessary to coordinate the work of each area and grasp each world, so that there will be no problems in debugging.

In recent years, Thermal break aluminum doors and windows have been loved by consumers in the market. Many consumers have come to visit and buy. Do you know why? What attracted them to come?

1. Energy saving and environmental protection

Thermal break aluminum doors and windows have good airtightness. In the hot summer, the indoor temperature is often higher than the outdoor temperature. If the doors and windows inside the home are not sealed well, the indoor temperature will drop relatively slowly, and the air conditioner will be turned on. The time will be longer. So on the contrary, if the doors and windows of the house are tightly sealed, the indoor temperature will drop faster.

In addition, the heat insulation belt can reduce the heat consumption and reduce the radiation of the air conditioner to our body, ensure our health, adjust the indoor temperature, and let us live in a healthier environment.

2. Good heat conduction performance

Thermal break aluminum doors and windows are made of aluminum alloy, which has better performance than ordinary materials. Its heat conduction performance is probably in the range of 1.9~3.w/m2.k. However, the heat conduction performance of ordinary aluminum alloy is higher than that of aluminum alloy used in broken aluminum doors and windows, so the comparison is obvious.

3. Reduce noise

The material thickness of the products of the Broken Bridge Aluminum Door and Window Quotation Factory will be made in strict accordance with the domestic door and window regulations, and the thickness is about 10mm or more. This thickness has a good sound insulation effect, preventing and reducing the transmission of sound. Make the surrounding environment more peaceful and comfortable.

4. Colorful

The color of the aluminum doors and windows of the broken bridge is changeable. The use of a variety of technical coatings can present different colors of the aluminum doors and windows of the broken bridge.

5. Can prevent solidification

When the temperature difference between indoor and outdoor is large, for example, in winter, cold outdoor air condenses into water droplets on the doors and windows, and will freeze on the doors and windows when cold, causing trouble. However, the Thermal break aluminum doors and windows will solve this problem for everyone. The designer of the aluminum doors and windows of the broken bridge also considered this problem, so they installed heat insulation strips on the aluminum doors and windows of the broken bridge. Generally, the surface temperature of the heat insulation strip is similar to the indoor temperature, so it can reduce the indoor temperature to a certain degree without re-condensing the temperature, ensuring that the indoor temperature is not affected by the outside world.

As a manufacturer of aluminium door and window machine, I don’t know how much you know about the daily maintenance of aluminum doors and windows machines. Now let’s talk about this issue for everyone.

1. Check mechanical parts and fasteners to prevent loosening. Every conveying part must be regularly lubricated, and the movable head rail must be regularly lubricated every week. The oil cup keeps a certain amount of oil, the circulating water of the water tank is replaced every day, the water tank is cleaned regularly every week, the nozzle is frequently checked, and the plug is found and cleaned in time. The working surface and jaws of the board fitter, the upper and lower pressing pliers should be kept clean and oil-free, and scrubbed every shift.

2. When not in use, the machine tool is cleaned up, and then the rust prevention of the circular guide rail and other moving parts is completed. The electrical control box is kept clean, cleaned frequently, and dried with an air gun. Regularly overhaul the on-site power supply system of the equipment, and check the phase and neutral relationship of the power supply system. Check the high-pressure hose regularly. Long-term use of high-pressure hoses will cause aging and damage everywhere, and the pressure resistance of the hose will decrease. The air source processor needs to be cleaned regularly, and the pressure gauge needs to be properly adjusted. The storage environment of the machine should be kept dry and free of moisture and corrosive gases to avoid damage to the machine.

3. Frequently check whether the shower equipment needs to be added with coolant, check the mechanical screws and fasteners to prevent loosening and affect the use, especially the travel switches behind the two heads. The machine should be kept clean. After each shift, clean up the chips in time, wipe the dust on the surface of the guide rail and the machine, add lubricating oil to the exposed surface of the disc guide rail and apply uniform paint. For equipment that will not be used for a long time, corresponding cleaning and maintenance work should be done, and the protective cover can be properly covered.

Regular maintenance of aluminum alloy processing equipment can not only reduce hidden dangers, but also extend the service life of the equipment and improve the working efficiency of the equipment. In fact, it is of great significance.

The aluminum window in the balcony position is generally drenched in the sun and rain, of course, it is very easy to oxidize and fade, but if you choose a good spraying process, the chance of fading will be very small.

Generally speaking, the quality of aluminum windows and doors is much better than that of plastic steel windows and doors.
The fading of plastic steel is inevitable, the material of plastic steel itself is good, but it is necessary to fade for a long time, to aging, this can not be prevented.

Therefore, compared with the windows and doors of all kinds of materials, the technology of broken bridge aluminum windows and doors is better.

Broken bridge aluminum windows and doors are used normally, and properly maintained, broken bridge aluminum profiles will not fade and change color!

Try to use the original factory broken bridge aluminum windows and doors products, not secondary spraying self-wearing products, those who can allow customers to choose the color of profiles are mostly secondary spraying self-wearing products, the product quality can not be compared with the original products.

The appearance color of broken bridge aluminum windows and doors should be bluish white.

The color is too white or gray, indicating that the stable ingredients in the material are not enough, and it is easy to age and turn yellow over time.