When it comes to door and window machine, what we know better may be aluminum alloy door and window machine, but today it is not the protagonist we want to talk about. Today we will talk about the difference between thermal break aluminum door and window machine and Upvc door and window machine.

Most of the thermal break aluminum doors and windows machine are used in the processing of thermal break aluminum doors and windows, and most of the Upvc doors and windows machine are used in the processing of Upvc doors and windows.

According to detailed classification, there are two types of door and window machine: sawing machine and milling machine. Perhaps some buyers think that these two machine can be used in common? In terms of power, the cutting saw blade of the broken aluminum door and window machine can completely cut the Upvc, while the cutting saw blade of the Upvc door and window machine cannot cut the thermal break Aluminum profile.
However, we must keep in mind that when using a thermal break aluminum cutting saw to cut Upvc profiles, you should pay attention to replacing the saw blade. If you continue to use the saw blade to cut, the result can only greatly reduce the life of the thermal break aluminum cutting door and window machine Count. Because the thremal break aluminum door and window machine cuts the Upvc door and window profile, the saw blade will heat up, and the Upvc profile will stick to the saw teeth, and the cutting effect will be greatly reduced.
Milling machine can be used for milling sinks and keyholes of doors and windows. The sink milling machine of the Upvc door and window machine is special, and the single-axis copying milling machine and the two-axis copying milling machine can be used in common use. Because the thermal break aluminum doors and windows are connected by screws, and the Upvc doors and windows are connected by welding, the combination of the two doors and windows has different perspectives and different machine. Angle splitters are used for aluminum alloy profile doors and windows, and welded angle splitters are used for split welding of Upvc doors and windows.

As a manufacturer of aluminium door and window machine, I don’t know how much you know about the daily maintenance of aluminum doors and windows machines. Now let’s talk about this issue for everyone.

1. Check mechanical parts and fasteners to prevent loosening. Every conveying part must be regularly lubricated, and the movable head rail must be regularly lubricated every week. The oil cup keeps a certain amount of oil, the circulating water of the water tank is replaced every day, the water tank is cleaned regularly every week, the nozzle is frequently checked, and the plug is found and cleaned in time. The working surface and jaws of the board fitter, the upper and lower pressing pliers should be kept clean and oil-free, and scrubbed every shift.

2. When not in use, the machine tool is cleaned up, and then the rust prevention of the circular guide rail and other moving parts is completed. The electrical control box is kept clean, cleaned frequently, and dried with an air gun. Regularly overhaul the on-site power supply system of the equipment, and check the phase and neutral relationship of the power supply system. Check the high-pressure hose regularly. Long-term use of high-pressure hoses will cause aging and damage everywhere, and the pressure resistance of the hose will decrease. The air source processor needs to be cleaned regularly, and the pressure gauge needs to be properly adjusted. The storage environment of the machine should be kept dry and free of moisture and corrosive gases to avoid damage to the machine.

3. Frequently check whether the shower equipment needs to be added with coolant, check the mechanical screws and fasteners to prevent loosening and affect the use, especially the travel switches behind the two heads. The machine should be kept clean. After each shift, clean up the chips in time, wipe the dust on the surface of the guide rail and the machine, add lubricating oil to the exposed surface of the disc guide rail and apply uniform paint. For equipment that will not be used for a long time, corresponding cleaning and maintenance work should be done, and the protective cover can be properly covered.

Regular maintenance of aluminum alloy processing equipment can not only reduce hidden dangers, but also extend the service life of the equipment and improve the working efficiency of the equipment. In fact, it is of great significance.