Do you konw how to maintain window machine in cold winter.

winter is coming, the temperature drops, and the equipment will have such and other problems under low temperature conditions. In order to let customers use the equipment better, we have specially sorted out the following points for attention to provide you with a set of winter door and window equipment maintenance program, for the reference of the majority of window industry readers!

1: Milling and cutting equipment (double head saw, end milling machine, CNC milling machine, corner cutting saw, aluminum wood tenon milling machine, aluminum wood milling machine, 90 degree cutting saw, etc.)

1. Clean the aluminum scraps on the equipment after work every day, especially the transmission parts and moving parts of the equipment (such as: guide rail, cylinder, working panel, etc.);

2. Regularly check the screws of all parts of the equipment to prevent loosening, resulting in accuracy error and safety accidents.

3. Regularly wipe diluted lubricating oil (such as linear guide rail) for each transmission shaft of the equipment;

4. The oil-based cutting fluid should be selected for aluminum machine, and the water blending ratio should be appropriately reduced;

5. Check whether there is icing in the air circuit and solenoid valve body of the equipment before starting work every day to ensure that the gas path is unobstructed before using the equipment. In order to avoid freezing of the gas path, it is necessary to discharge water from the air compressor every day and replace the filter element.

6. Check whether the power switch is normal and whether the wire is aging every day. If there is any problem, replace it immediately.

7. Aluminum profiles, wood, etc. should be handled with care to prevent collision, resulting in equipment damage and error.

8. It is forbidden to work with gloves on the equipment. Do not wear scarves and other similar clothing to prevent accidents.

2： Aluminum crimping machine (Aluminum crimping machine ,punching machine,copy router etc.)

In short, the winter is coming and the weather is cold. We should do a good job in the maintenance of the equipment, so as to increase the service life of the equipment.

1. Clean up the aluminum chips and oil sludge accumulated in the equipment platform area;

2. Add lubricating oil to the moving parts of the table;

3. The angle machine hydraulic oil should be filled with 32 ? hydraulic oil as much as possible. It is recommended to replace the hydraulic oil once every half a year.

4. Check whether there is icing in the air circuit and solenoid valve body of the equipment before starting work every day to ensure that the gas path is unobstructed before using the equipment. In order to avoid freezing of the gas path, it is necessary to discharge water from the air compressor every day and replace the filter element.

5. Regularly check the screws of all parts of the equipment to prevent loosening, resulting in accuracy error and safety accidents.

6. Check whether the power switch is normal and whether the wire is aging every day. If there is any problem, replace it immediately.

7. Aluminum profiles, wood, etc. should be handled with care to prevent collision, resulting in equipment damage and error.

8. It is forbidden to work with gloves on the equipment. Do not wear scarves and other similar clothing to prevent accidents.

Related Product: Window machine

Window machine, Window machine, Windows machine, Window machines, Windows machines,