06 Oct, 2021
At present, many family doors and windows and packaging balcony materials are made of a variety of aluminum alloy profiles.
Therefore, when you choose and buy, be sure to look at the quality of the raw materials.
At present, there are many self-employed people who process aluminum alloy doors and windows, and they do not understand the structural characteristics and performance of aluminum alloy doors and windows.
In order to reduce the cost of Jerry-building, inferior quality, the hidden danger of the product is larger, generally not suitable for use.
There is also a point that it is best to choose the products of regular aluminum alloy door and window equipment manufacturers.
Take the following methods:
1. The pressing system is controlled by an independent air pressure cylinder, with a linear rail with special gantry double guide columns, and the pressing device is stable.
2.Coolant directly cooling saw blade to improve saw blade life and surface quality, especially for solid materials, coolant recycling, less waste and low cost.
3. The pressing system is controlled by an independent air pressure cylinder and specially equipped with a pressure adjustment system. The pressing pressure can be adjusted according to the size and thickness of the material, so as to prevent the thin material from being deformed under excessive pressure.
4. The torque of the motor should be sufficient.
5. The saw blade should be installed, not upside down.
Check the air pressure.